Dental wear in natural teeth opposed to monolithic zirconia crowns vs. metal-ceramic. Systematized review.

Authors

DOI:

https://doi.org/10.59334/ROV.v1i42.616

Keywords:

tooth wear, zirconia, metal ceramic alloys, tooth crown

Abstract

Objective: To carry out a systematic review on the comparison of dental wear exerted by monolithic zirconia crowns and metal-porcelain crowns on opposing natural teeth. Materials and methods: A systematic search was carried out on different databases (Pubmed, Scopus, Google Scholar and Scielo) and 6 articles were selected, of which 4 were in vivo studies, and 2 were in vitro. Results: In 2 in vivo studies, the monolithic zirconia crown exerted less wear than the metallo-ceramic crown in the 1-year control. One in vivo study indicates that monolithic zirconia exerts less wear on the opposing natural tooth in a 6-month follow-up, but exerts greater wear than ceramic metal after one year. Other in vivo study indicates that monolithic zirconia exerts greater wear than ceramic metal in 6-month and 1-year controls. In vitro studies indicate that the monolithic zirconia crown causes less wear on the opposing natural tooth between 240,000 to 250,000 chewing cycles, which is equivalent to 1 year. Conclusions: Both monolithic zirconia crowns and metal-ceramic crowns behave well within the masticatory system, although studies show that the monolithic zirconia crown would exert less wear on the opposing tooth, there are other factors that influence wear, such as final finish of the crown, for example: glazed or polished. Intraoral scanning would be a more precise method for quantifying wear, since it prevents the impression-taking procedure. A follow-up of more than 1 year is suggested in future investigations related to the subject, in order to corroborate if the same results are maintained or could be different.

Downloads

Download data is not yet available.

References

Addy, M., Shellis, R. P. (2006). Interaction between attrition, abrasion and erosion in tooth wear. Monographs in Oral Science, 20, 17-31. https://doi.org/10.1159/000093348

Ahmed, K. E. (2013). The psychology of tooth wear. Special Care in Dentistry, 33(1), 28-34. https://doi.org/10.1111/j.1754-4505.2012.00319.x

Asai, T., Kazama, R., Fukushima, M., Okiji, T. (2010). Effect of overglazed and polished surface finishes on the compressive fracture strength of machinable ceramic materials. Dental Materials Journal, 29(6), 661-667. https://doi.org/10.4012/dmj.2010-029

Castro-Aguilar, E. G., Matta-Morales, C. O., Orellana-Valdivieso, O. (2014). Consideraciones actuales en la utilización de coronas unitarias libres de metal en el sector posterior. Revista Estomatológica Herediana, 24(4), 278. https://doi.org/10.20453/reh.v24i4.2171

Deval, P., Tembhurne, J., Gangurde, A., Chauhan, M., Jaiswal, N., Tiwari, D. (2021). A clinical comparative evaluation of the wear of enamel antagonists against monolithic zirconia and metal-ceramic crowns. The International Journal of Prosthodontics, 34(6), 744-751. https://doi.org/10.11607/ijp.6598

Esquivel-Upshaw, J. F., Kim, M. J., Hsu, S. M., Abdulhameed, N., Jenkins, R., Neal, D., Ren, F., Clark, A. E. (2018). Randomized clinical study of wear of enamel antagonists against polished monolithic zirconia crowns. Journal of Dentistry, 68(October), 19-27. https://doi.org/10.1016/j.jdent.2017.10.005

Esquivel-Upshaw, J., Hsu, S. M.; Bohórquez, A. C., Abdulhameed, N., Scheiffele, G. W., Kim, M.; Neal, D., Chai, J. , Ren, F. (2020). Novel methodology for measuring intraoral wear in enamel and dental restorative materials. Clinical and Experimental Dental Research, 6(6), 677-685. https://doi.org/10.1002/cre2.322

Furuse, A. Y., Freitas, C. A. de, Zanotti, T. S., Piola Rizzante, F. A., Antunes de Freitas, M. F. (2016). Linear setting expansion of different gypsum products. Rsbo, 12(1), 61. https://doi.org/10.21726/rsbo.v12i1.174

Ghaffari, T., Rad, F. H., Goftari, A., Pashazadeh, F., Ataei, K. (2022). Natural teeth wear opposite to glazed and polished ceramic crowns: A systematic review. https://doi.org/10.4103/1735-3327.363567

Grandon, F., Galdames, B., Marcus, N., Muster, M. (2018). Cerámica libre de metal terminada y caracterizada por pulido manual. Revista Clínica de Periodoncia, Implantología y Rehabilitación Oral, 11(1), 39-42. https://doi.org/10.4067/s0719-01072018000100039

Gupta, S., Kumar, S. (2011). Lasers in dentistry - An overview. Trends in Biomaterials and Artificial Organs, 25(3), 119-123. https://doi.org/10.1089/lms.1989.7.3.33

Habib, S. R., Alotaibi, A., Al Hazza, N.; Allam, Y., AlGhazi, M. (2019). Two-body wear behavior of human enamel versus monolithic zirconia, lithium disilicate, ceramometal and composite resin. Journal of Advanced Prosthodontics, 11(1), 23-31. https://doi.org/10.4047/jap.2019.11.1.23

Habib, S. R., Ansari, A. S., Alqahtani, M., Alshiddi, I. F., Alqahtani, A. S., Hassan, S. H. (2019). Analysis of enamel and material wear by digital microscope: An in-vitro study Ceramics. Brazilian Oral Research, 33, 1-11. https://doi.org/10.1590/1807-3107BOR-2019.VOL33.0121

Hamdy, T. M., Abdelnabi, A., Abdelraouf, R. M. (2020). Reinforced dental plaster with low setting expansion and enhanced microhardness. Bulletin of the National Research Centre, 44(1), 0-6. https://doi.org/10.1186/s42269-020-00334-8

Hulterström, A. K., Bergman, M. (1993). Polishing systems for dental ceramics. Acta Odontologica Scandinavica, 51(4), 229-234. https://doi.org/10.3109/00016359309040571

Janyavula, S., Lawson, N., Cakir, D., Beck, P., Ramp, L. C., Burgess, J. O. (2013). The wear of polished and glazed zirconia against enamel. Journal of Prosthetic Dentistry, 109(1), 22-29. https://doi.org/10.1016/S0022-3913(13)60005-0.

Joshi, P. R., Bhrat, G. S., Shrenoy, V. (2009). Comparative evaluation of dimensional accuracy of addition silicone and condensation silicone impression materials - An in-vitro study. Malaysian Dental Journal, 30(January), 34-42.

Jung, Y. S., Lee, J. W., Choi, Y. J., Ahn, J. S., Shin, S. W., Huh, J. B. (2010). A study on the in-vitro wear of the natural tooth structure by opposing zirconia or dental porcelain. Journal of Advanced Prosthodontics, 2(3), 111-115. https://doi.org/10.4047/jap.2010.2.3.111

Luis Gabriel, L., Melissa, V., Johana, R., Efrain, L. (2020). Bruxism Management: A Comprehensive Review. Clinical Medical Reviews and Case Reports, 7(8), 1-6. https://doi.org/10.23937/2378-3656/1410316

Moya, M. P., Marquardt, K., Olate, S. (2017). Caracterización de la función masticatoria en estudiantes universitarios. International Journal of Odontostomatology, 11(4), 495-499. https://doi.org/10.4067/s0718-381x2017000400495

Mundhe, K., Jain, V., Pruthi, G., Shah, N. (2015). Clinical study to evaluate the wear of natural enamel antagonist to zirconia and metal ceramic crowns. Journal of Prosthetic Dentistry, 114(3), 358-363. https://doi.org/10.1016/j.prosdent.2015.03.001

Oumvertos Koutayas, S., Vagkopoulou, T., Pelekanos, S., Koidis, P., Rudolf Strub, J. (2010). Zirconia en odontología: segunda parte. Revolución clínica basada en la evidencia. The European Journal of Esthetic Dentistry, 3(2), 126-161. https://www.elsevier.es/es-revista-the-european-journal-esthetic-dentistry-312-pdf-X2013148810538873

Polanía Castillo, M. F., Melo Andrade, W. A., Londoño Mejia, L. A. (2014). Evaluation of changes in sleep bruxism patterns produced by two types of thermoformed retainers. Universitas Odontologica, 33(70). https://doi.org/10.11144/javeriana.uo33-70.ecpb

Savencu, C. E., Şerban, C., Porojan, L. (2020). Adaptability evaluation of metal-ceramic crowns obtained by additive and subtractive technologies. Applied Sciences (Switzerland), 10(16). https://doi.org/10.3390/app10165563

Selvaraj, U., Koli, D. K., Jain, V., Nanda, A. (2020). Evaluation of the wear of glazed and polished zirconia crowns and the opposing natural teeth: A clinical pilot study. Journal of Prosthetic Dentistry, 123(1), 1-6. https://doi.org/10.1016/j.prosdent.2020.04.007

Sterenborg, B. A. M. M., Kalaykova, S. I., Loomans, B. A. C., Huysmans, M. C. D. N. J. M. (2018). Impact of tooth wear on masticatory performance. Journal of Dentistry, 76(June), 98-101. https://doi.org/10.1016/j.jdent.2018.06.016

Wetselaar, P., Lobbezoo, F. (2016). The tooth wear evaluation system: A modular clinical guideline for the diagnosis and management planning of worn dentitions. Journal of Oral Rehabilitation, 43(1), 69-80. https://doi.org/10.1111/joor.12340

Published

2025-01-18

How to Cite

Díaz Albino, A. G., & Español, E. (2025). Dental wear in natural teeth opposed to monolithic zirconia crowns vs. metal-ceramic. Systematized review. O.V., 1(42). https://doi.org/10.59334/ROV.v1i42.616

Issue

Section

Review

Categories

Métricas alternativas